One Way Clutch Sprocket
Economical to buy, easy to apply, simple to use. Pick the size of the clutch sprocket needed and we’ll build it into an assembly. Or substitute a pulley, etc. for the sprocket.
As long as there is chain clearance to fit over the style housing preferred (MB or P), these conveyor clutches offer compact design, rugged features, and economical motion control. They can also be used as a backstop clutch when mounted on a stationary shaft and set to make contact with the chain in a fashion similar to an idler sprocket. These overrunning sprocket clutches are a time tested design with many decades of experience and millions of fail-safe revolutions.
All pitches available, consult factory for specifications not given here. Order by part number. List specifications as in the following example. Abbreviations are suffixed to the size number; C for Cam, P for pitch, T for number of teeth and B for bore.
Part Number Example:
| Max Bore | Cam Size | Pitch | Number of Teeth | L | ||
|---|---|---|---|---|---|---|
| Type MB | Type P | Type MB | Type P | |||
| .562 .625 .875 |
5 14 28 |
35 | 15, 16 20 25 |
17 Up 21 Up 26 Up |
.812 .812 1.062 |
.952 1.034 1.159 |
| .562 .625 .875 |
5 14 28 |
40 | 12 15 20 |
13 Up 16 Up 21 Up |
.812 .812 1.062 |
1.068 1.150 1.275 |
| .625 .875 1.250 |
14 28 100 |
50 | 12 15, 16 20, 21 |
13 Up 17 Up 22 Up |
.812 1.062 1.375 |
1.209 1.334 1.562 |
| .625 .875 1.250 |
14 28 100 |
60 | 12 14 18 |
13 Up 15 Up 19 Up |
.812 1.062 1.375 |
1.325 1.450 1.678 |